2.845

2023影响因子

(CJCR)

  • 中文核心
  • EI
  • 中国科技核心
  • Scopus
  • CSCD
  • 英国科学文摘

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

汽水板式换热过程区间串级智能控制方法

贾瑶 柴天佑

贾瑶, 柴天佑. 汽水板式换热过程区间串级智能控制方法. 自动化学报, 2016, 42(1): 37-46. doi: 10.16383/j.aas.2016.c150057
引用本文: 贾瑶, 柴天佑. 汽水板式换热过程区间串级智能控制方法. 自动化学报, 2016, 42(1): 37-46. doi: 10.16383/j.aas.2016.c150057
JIA Yao, CHAI Tian-You. Interval Cascade Intelligent Control in Vaper-water Plate-type Heat Exchange Process. ACTA AUTOMATICA SINICA, 2016, 42(1): 37-46. doi: 10.16383/j.aas.2016.c150057
Citation: JIA Yao, CHAI Tian-You. Interval Cascade Intelligent Control in Vaper-water Plate-type Heat Exchange Process. ACTA AUTOMATICA SINICA, 2016, 42(1): 37-46. doi: 10.16383/j.aas.2016.c150057

汽水板式换热过程区间串级智能控制方法

doi: 10.16383/j.aas.2016.c150057
基金项目: 

国家自然科学基金 61403071

国家高技术研究发展计划(863计划) SQ2015AA0400561

详细信息
    作者简介:

    柴天佑 中国工程院院士,东北大学教授.IEEE Fellow,IFAC Fellow,欧亚科学院院士.主要研究方向为自适应控制,智能解耦控制,流程工业综合自动化理论、方法与技术.E-mail:tychai@mail.neu.edu.cn

    通讯作者:

    贾瑶 流程工业综合自动化国家重点实验室博士研究生.主要研究方向为智能串级控制技术.本文通信作者.E-mail:jiayao_neu@163.com

Interval Cascade Intelligent Control in Vaper-water Plate-type Heat Exchange Process

Funds: 

National Natural Science Foundation of China 61403071

Supported by National High Technology Research and Development Program of China(863 Program) SQ2015AA0400561

More Information
    Author Bio:

    Academician of Chinese Academy of Engineering, professor at Northeastern University, IEEE Fellow, IFAC Fellow, and academician of the International Eurasian Academy of Sciences. He received his Ph. D. degree from Northeastern University in 1985. His research interest covers adaptive control, intelligent control, and integrated automation of industrial process

    Corresponding author: JIA Yao Ph.D. candidate at the State Key Laboratory of Synthetical Automation for Process Industries. His research interest covers intelligent cascade control technology. Corresponding author of this paper
  • 摘要: 汽水板式换热过程是以蒸汽阀门开度为输入,以蒸汽流量为内环输出,以供水温度为外环输出的强非线性串级工业过程,受到室外温度和厂区热用户放水的随机干扰,导致供水温度和蒸汽流量大范围波动.本文针对处于干扰环境下的具有不确定性和强非线性串级工业过程,将前馈补偿、串级PI控制和规则推理区间补偿控制相结合,提出了由外环供水温度前馈PI控制、内环蒸汽流量PI控制的串级控制与规则推理的内外环设定值区间补偿控制组成的区间串级智能控制方法,并成功应用于某选矿厂的汽水板式换热过程,工业应用结果表明所提出的方法在室外温度和热用户放水的随机干扰下,可以将供水温度和蒸汽流量同时控制在工艺要求的范围内.
  • 图  1  换热过程工艺流程

    Fig.  1  The technichical flowsheet of PHEP

    图  2  厂区汽水板式换热过程控制现状

    Fig.  2  The existing manual-based control status of PHEP

    图  3  汽水板式换热过程区间串级智能控制结构图

    Fig.  3  The intelligent control structure for of PHEP

    图  4  供水温度前馈PI控制和区间补偿控制算法结构图

    Fig.  4  The supply water temperature control algorithm structure

    图  5  采用区间串级智能控制方法时的被控对象输出、参考输入、可测干扰和控制输入

    Fig.  5  The output,input,measurable disturbances and control inputs of using the method of intervals cascade intelligent control

    图  6  板式汽水换热过程现场场景

    Fig.  6  The vaper-water plate-type heat exchanger process

    图  7  控制系统硬件平台

    Fig.  7  Control system hardware platform

    图  8  汽水板式换热系统控制软件监控界面

    Fig.  8  Human machine interface of PHEP

    图  9  采用区间串级智能控制方法时的被控对象输出、参考输入、控制输入和可测干扰

    Fig.  9  The output,input,measurable disturbances and control inputs when using the proposed method

    图  10  采用人工控制时的被控对象输出、控制输入和可测干扰

    Fig.  10  The output,input,measurable disturbances and control inputs when using manual control

    表  1  变量参数表

    Table  1  Variable parameter list

    变量描述 变量 描述
    $T$ 室内温度 $V$ 换热板体积
    $T_{\rm out}$ 室外温度 $\mu$ 换热面修正系数
    $y_2$ 供水温度 $K$ 换热系数
    $y_1$ 蒸汽流量 $\eta$ 换热效率
    ${y_{2\min} }$ 供水温度下限值 $H_v$ 蒸汽热含
    ${y_{2\max} }$ 供水温度上限值 ${\rho _w}$ 水密度
    ${y_{1\min} }$ 蒸汽流量下限值 $c_w$ 水比热
    ${y_{1\max} }$ 蒸汽流量上限值 $k_0$ 蒸汽流量比例系数
    ${y_{2ref}}$ 温度预设定值 $\tau$ 蒸汽流量实际常数
    ${y_{2sp}}$ 温度设定值 $J$ 回水相对流量
    ${y_{1ref}}$ 流量预设定值 $I$ 热交换特性参数
    ${y_{1sp}}$ 流量设定值 ${\varphi _1},{\varphi _2}$ 设计参数
    $u$ 阀门开度 $K_2$ 温度过程增益
    $P_1$ 蒸汽压力 $T_2$ 温度时间常数
    $T_1$ 蒸汽温度 ${\tau_2}$ 温度延迟时间
    $T_3$ 回水温度 ${k_{p2}},{k_{i2}}$ 外环PI控制参数
    $T_4$ 冷凝水温度 ${k_{f1}},{k_{f2}}$ 前馈控制参数
    $F_2$ 供水流量 ${k_{p1}},{k_{i1}}$ 内环PI控制参数
    $F_3$ 回水流量 $\varepsilon ,\lambda ,\alpha ,\beta $ 区间补偿控制参数
    $F_4$ 冷凝水流量 $\phi $ 阀门阈值
    $F_b$ 补水流量 ${T_{m1}}$ 流量采样周期
    $F_r$ 放水总流量 ${T_{m2}}$ 温度采样周期
    下载: 导出CSV

    表  2  采用本文控制方法与人工控制方法对比数据

    Table  2  Comparison of the data between the proposed method and the artificial control method

    $y_2$ ~(℃) $y_1$ ~(t/h) $u$ ~(%)
    本文 ±3 ±0.6 20
    人工 ±8 ±2.0 40
    下载: 导出CSV
  • [1] 石兆玉. 供热系统运行调节与控制. 北京:清华大学出版社, 1999.

    Shi Zhao-Yu. The Adjustment of Heating System and Control. Beijing:Tsinghua University Press, 1999.
    [2] 葛楠, 李铁鹰, 王宇慧. 变论域模糊PID算法在供热控制中的应用. 科学技术与工程, 2012, 12(34):9203-9206 http://www.cnki.com.cn/Article/CJFDTOTAL-KXJS201234017.htm

    Ge Nan, Li Tie-Ying, Wang Yu-Hui. The application of variable universe fuzzy PID algorithm in heating control system. Science Technology and Engineering, 2012, 12(34):9203-9206 http://www.cnki.com.cn/Article/CJFDTOTAL-KXJS201234017.htm
    [3] Rauh A, Dittrich C, Aschemann H, Nedialkov N S, Pryce J D. A differential-algebraic approach for robust control design and disturbance compensation of finite-dimensional models of heat transfer processes. In:Proceedings of the 2013 IEEE International Conference on Mechatronics. Vicenza, Italy:IEEE, 2013. 40-45
    [4] Kharitonov A, Sawodny O. Flatness-based feedforward and feedback control for heat and mass transfer processes. In:Proceedings of the 2006 IEEE Conference on Robotics, Automation and Mechatronics. Bangkok, Thailand:IEEE, 2006. 1-6
    [5] Bobál V, Kubaltčík M, Dostál P. Identification and self-tuning predictive control of heat exchanger. In:Proceedings of the 2013 International Conference on Process Control. Strbske Pleso, Slovakia:IEEE, 2013. 219-224
    [6] Holman J P. Heat Transfer. New York:McGraw-Hill Publishing Co., 2001.
    [7] 李海波, 柴天佑, 赵大勇. 混合选别浓密机底流矿浆浓度和流量区间智能切换mm控制方法. 自动化学报, 2013, 40(9):1967-1975 http://www.aas.net.cn/CN/abstract/abstract18467.shtml

    Li Hai-Bo, Chai Tian-You, Zhao Da-Yong. Intelligent switching control of underflow slurry concentration and flowrate intervals in mixed separation thickener. Acta Automatica Sinica, 2013, 40(9):1967-1975 http://www.aas.net.cn/CN/abstract/abstract18467.shtml
    [8] 涂光备. 供热计量技术. 北京:中国建筑工业出版社, 2003.

    Tu Guang-Bei. Heat Metering Technology. Beijing:China Architecture&Building Press, 2003.
    [9] 张煜. 换热站供热系统研究及智能控制方案设计[硕士学位论文], 辽宁科技大学, 中国, 2011.

    Zhang Yi. The Study of Heat Exchange Station Heating System and the Design of Intelligent Control Program[Master dissertation], University of Science and Technology Liaoning, China, 2011.
    [10] 梁元元. 供水温度分栋可调的控制策略[硕士学位论文], 哈尔滨工业大学, 中国, 2011.

    Liang Yuan-Yuan. The Control Strategy on Supply Water Temperature Building Regulation System[Master dissertation], Harbin Institute of Technology, China, 2011.
    [11] Seborg D E, Edgar T F, Mellichamp D A[著], 王京春, 王凌, 金以慧[译]. 过程的动态特性与控制. 北京:电子工业出版社, 2006.

    Seborg D E, Edgar T F, Mellichamp D A[Author], Wang Jing-Chun, Wang Ling, Jin Yi-Hui[Translator]. Process Dynamics and Control. Beijing:Publishing House of Electronics Industry, 2006.
    [12] 赵大勇, 柴天佑. 再磨过程泵池液位区间与给矿压力模糊切换控制. 自动化学报, 2013, 39(5):556-564 http://www.aas.net.cn/CN/abstract/abstract17816.shtml

    Zhao Da-Yong, Chai Tian-you. Fuzzy switching control for sump level interval and hydrocyclone pressure in regrinding process. Acta Automatica Sinica, 2013, 39(5):556-564 http://www.aas.net.cn/CN/abstract/abstract17816.shtml
    [13] Lequin O, Gevers M, Mossberg M, Bosmans E, Triest L. Iterative feedback tuning of PID parameters:comparison with classical tuning rules. Control Engineering Practice, 2003, 11(9):1023-1033 doi: 10.1016/S0967-0661(02)00303-9
    [14] Dai W, Chai T Y, Yang S X. Data-driven optimization control for safety operation of hematite grinding process. IEEE Transactions on Industrial Electronics, 2015, 62(5):2930-2941 doi: 10.1109/TIE.2014.2362093
    [15] Li W, Hori Y. An algorithm for extracting fuzzy rules based on RBF neural network. IEEE Transactions on Industrial Electronics, 2006, 53(4):1269-1276 doi: 10.1109/TIE.2006.878305
    [16] Wang Y F, Wang D H, Chai T Y. Extraction and adaptation of fuzzy rules for friction modeling and control compensation. IEEE Transactions on Fuzzy Systems, 2011, 19(4):682-693 doi: 10.1109/TFUZZ.2011.2134104
    [17] Aström K J, Anton J J, Arz'en K E. Expert control. Automatica, 1986, 22(3):277-286 doi: 10.1016/0005-1098(86)90026-9
    [18] 刘建昌, 关守平, 周玮. 计算机控制系统. 北京:科学出版社, 2009.

    Liu Jian-Chang, Guan Shou-Ping, Zhou Wei. Computer Control System. Beijing:Science Press, 2009.
    [19] (Katsuhiko Ogata[著], 蔡涛, 张娟[译]. 离散时间控制系统. 第2版. 北京:电子工业出版社, 2014.)

    Katsuhiko Ogata[Author], Cai Tao, Zhang Juan[Translator]. Discrete-Time Control Systems(Second edition). Beijing:Publishing House of Electronics Industry, 2014.
    [20] 金以慧. 过程控制. 北京:清华大学出版社, 1993.

    Jin Yi-Hui. Process Control. Beijing:Tsinghua University Press, 1993.
  • 加载中
图(10) / 表(2)
计量
  • 文章访问数:  2241
  • HTML全文浏览量:  400
  • PDF下载量:  1101
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-02-04
  • 录用日期:  2015-10-04
  • 刊出日期:  2016-01-01

目录

    /

    返回文章
    返回