2.765

2022影响因子

(CJCR)

  • 中文核心
  • EI
  • 中国科技核心
  • Scopus
  • CSCD
  • 英国科学文摘

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于定性仿真和模糊知识的离心式压缩机排气量不足原因诊断

陆云松 王福利 贾明兴

陆云松, 王福利, 贾明兴. 基于定性仿真和模糊知识的离心式压缩机排气量不足原因诊断. 自动化学报, 2015, 41(11): 1867-1876. doi: 10.16383/j.aas.2015.c150117
引用本文: 陆云松, 王福利, 贾明兴. 基于定性仿真和模糊知识的离心式压缩机排气量不足原因诊断. 自动化学报, 2015, 41(11): 1867-1876. doi: 10.16383/j.aas.2015.c150117
LU Yun-Song, WANG Fu-Li, JIA Ming-Xing. Qualitative Simulation and Fuzzy Knowledge Based Fault Diagnosis of Centrifugal Compressor Insufficient Discharge. ACTA AUTOMATICA SINICA, 2015, 41(11): 1867-1876. doi: 10.16383/j.aas.2015.c150117
Citation: LU Yun-Song, WANG Fu-Li, JIA Ming-Xing. Qualitative Simulation and Fuzzy Knowledge Based Fault Diagnosis of Centrifugal Compressor Insufficient Discharge. ACTA AUTOMATICA SINICA, 2015, 41(11): 1867-1876. doi: 10.16383/j.aas.2015.c150117

基于定性仿真和模糊知识的离心式压缩机排气量不足原因诊断

doi: 10.16383/j.aas.2015.c150117
基金项目: 

国家自然科学基金(61374146,61174130,61374147,61304121),流程工业综合自动化国家重点实验室基础科研业务费(2013ZCX02-04),国家科技支撑计划项目(2013BAK02B01-02),辽宁省科技计划项目(2013231025)资助

详细信息
    作者简介:

    王福利 东北大学教授.主要研究方向为复杂工业过程建模、控制与优化,工业过程监测、质量预报与故障诊断.E-mail:wangfuli@ise.neu.edu.cn

    贾明兴 东北大学教授.主要研究方向为复杂工业过程建模、控制与优化,过程监测与故障诊断.E-mail:jiamingxing@ise.neu.edu.cn

    通讯作者:

    陆云松 东北大学博士研究生.主要研究方向为复杂工业过程监测与故障诊断.本文通信作者.E-mail:yunsonglu@126.com

Qualitative Simulation and Fuzzy Knowledge Based Fault Diagnosis of Centrifugal Compressor Insufficient Discharge

Funds: 

Supported by National Natural Science Foundation of China (61374146, 61174130, 61374147, 61304121), Stat Key Laboratory of Synthetical Automation for Process Industries Fundamental Research Funds (2013ZCX02-04), Key Projects in the National Science and Technology Pillar Program during the Twelfth Five-year Plan Period (2013BAK02B01-02), and Science and Technology Plan of Liaoning Province (2013231025)

  • 摘要: 针对引起离心式压缩机排气量不足的原因,本文提出一种基于定性仿真和模糊知识的诊断方法.利用压缩机结构原理和故障机理等定性知识建立故障定性模型库,并推理得到压缩机排气量受不同因素影响时的定性规则库.对系统变量的观测值利用定性趋势提取和模糊化进行定性化处理.提出了基于变量定性趋势和模糊定性值约束的滑动窗口加权匹配策略,并根据匹配结果诊断出导致排气量不足的原因.最后通过两个实例仿真验证了所提方法的有效性.
  • [1] Paparella F, Dominguez L, Cortinovis A, Mercangoz M, Pareschi D, Bittanti S. Load sharing optimization of parallel compressors. In:Proceedings of the 2013 European Control Conference. Zurich, Switzerland:IEEE, 2013. 4059-4064
    [2] [2] Gravdahl J T, Egeland O. Compressor Surge and Rotating Stall:Modeling and Control. New York:Springer Publishing Company, 2011.
    [3] [3] Azadeh A, Saberi M, Kazem A, Ebrahimipour V, Nourmohammadzadeh A, Saberi Z. A flexible algorithm for fault diagnosis in a centrifugal pump with corrupted data and noise based on ANN and support vector machine with hyper-parameters optimization. Applied Soft Computing, 2014, 13(3):1478-1485
    [4] [4] Sakthivel N R, Nair B B, Elangovan M, Sugumaran V, Saravanmurugan S. Comparison of dimensionality reduction techniques for the fault diagnosis of mono block centrifugal pump using vibration signals. Engineering Science and Technology, an International Journal, 2014, 17(1):30-38
    [5] [5] Muralidharan V, Sugumaran V, Indira V. Fault diagnosis of monoblock centrifugal pump using SVM. Engineering Science and Technology, an International Journal, 2014, 17(3):152-157
    [6] Ma Jie, Li Gang, Chen Mo. Nonlinear fault reconstruction based fault prognosis for rotating machinery. Acta Automatica Sinica, 2014, 40(9):2045-2049(马洁, 李钢, 陈默. 基于非线性故障重构的旋转机械故障预测方法. 自动化学报, 2014, 40(9):2045-2049)
    [7] [7] Loboda I, Yepifanov S. A mixed data-driven and model based fault classification for gas turbine diagnosis. In:Proceedings of the ASME Turbo Expo 2010:Power for Land, Sea and Air. Glasgow, UK:ASME, 2010. 257-265
    [8] [8] Zanoli S M, Astolfi G, Barboni L. Applications of fault diagnosis techniques for a multishaft centrifugal compressor. In:Proceedings of the 18th Mediterranean Conference on Control and Automation. Marrakech, Morocco:IEEE, 2010. 64-69
    [9] Huang Zhong-Yue, Wang Xiao-Fang, Wang Wei. Turbine Compressor. Beijing:Chemical Industry Press, 2014.(黄钟岳, 王晓放, 王崴. 透平式压缩机. 北京:化学工业出版社, 2014.)
    [10] Kuipers B J. Qualitative simulation. Artificial Intelligence, 1986, 29(3):289-338
    [11] Qi X Z, Liu B J. Novel approach of fuzzy qualitative simulation. In:Proceedings of the 2008 IEEE International Conference on Automation and Logistics. Qingdao, China:IEEE, 2008. 2920-2924
    [12] Liu Bing-Jie, Hu Chang-Hua, Ye Xue-Mei, Cai Guang-Bin. Improvements of Q3 algorithm and its application in sneak circuit analysis. Control and Decision, 2007, 22(8):893-898(刘丙杰, 胡昌华, 叶雪梅, 蔡光斌. Q3算法的改进及其在潜在通路分析中的应用. 控制与决策, 2007, 22(8):893-898)
    [13] Wang Hong-Jiang, Sun Bao-Min, Tian Jin-Bu. The application of qualitative simulation to process monitoring and fault diagnosis of boiler. Journal of Engineering Thermophysics, 2007, 28(1):12-14(王洪江, 孙保民, 田进步. 定性仿真在锅炉状态监控和故障诊断中的应用. 工程热物理学报, 2007, 28(1):12-14)
    [14] Song Wei-Xu. Research on Fault Diagnosis of AUV Thruster and Sensor Based on Fuzzy Qualitative Simulation[Master dissertation], Harbin Engineering University, China, 2011. (宋炜胥. 基于模糊定性仿真的AUV推进器与传感器故障诊断方法研究[硕士学位论文], 哈尔滨工程大学, 中国, 2011.)
    [15] Dash S, Maurya M R, Venkatasubramanian V, Rengaswamy R. A novel interval-halving framework for automated identification of process trends. AIChE Journal, 2004, 50(1):149-162
    [16] Chu F, Wang F L, Wang X G, Zhang S N. Performance modeling of centrifugal compressor using kernel partial least squares. Applied Thermal Engineering, 2012, 44:90-99
  • 加载中
计量
  • 文章访问数:  1409
  • HTML全文浏览量:  98
  • PDF下载量:  777
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-03-11
  • 修回日期:  2015-07-07
  • 刊出日期:  2015-11-20

目录

    /

    返回文章
    返回