在线考虑运动学限制的最小加速度的轨迹规划

王英石; 孙雷; 周璐; 刘景泰

doi:10.3724/SP.J.1004.2014.01328

在线考虑运动学限制的最小加速度的轨迹规划

doi: 10.3724/SP.J.1004.2014.01328

王英石^1,2,
孙雷^1,2,,
周璐^1,2,
刘景泰^1,2

1.
南开大学机器人与信息自动化研究所天津 300071;
2.
天津市智能机器人技术重点实验室天津 300071

基金项目:

Supported by the National High Technology Program of China (863Program) (2012AA041403, 2008AA042601)

计量
- 文章访问数: 2427
- HTML全文浏览量: 104
- PDF下载量: 1625
- 被引次数: 0
出版历程
- 收稿日期: 2013-09-04
- 修回日期: 2013-12-11
- 刊出日期: 2014-07-20

Online Minimum-acceleration Trajectory Planning with the Kinematic Constraints

WANG Ying-Shi^1,2,
SUN Lei^{1,2
,},
ZHOU Lu^1,2,
LIU Jing-Tai^1,2

1.
Institute of Robotics and Automatic Information System, Nankai University, Tianjin 300071, China;
2.
Tianjin Key Lab-oratory of Intelligent Robotics, Nankai University, Tianjin 300071, China

Funds:

Supported by the National High Technology Program of China (863Program) (2012AA041403, 2008AA042601)

More Information

Corresponding author: SUN Lei Associate professor at NankaiUniversity. He received the B. E. and M. S.degrees in industry automation from Tian-jin University, China, in 1999 and 2002, and the Ph. D. degree in control theoryand control engineering from Nankai Uni-versity, China，in 2005. In 2005，he joinedNankai University, where he is currently anassociate professor in the College of Com-puter and Control Engineering. His re-search interest covers robotics and auto-matic control, teleoperation of robots in networks, wireless sen-sor network, micro-electro-mechanical systems (MEMS). E-mail：sunl@robot.nankai.edu.cn

摘要

摘要: 提出了一种基于简化运动规划的机器人轨迹规划新方法，可用于多自由度的机器人操作臂系统。关键问题是找到最小加速度的轨迹规划，来优化操作臂的运动以减少抖动。此外，给出了轨迹规划的解存在的充分必要条件，并考虑了所有的关节位置、角速度、加速度、加加速度等运动学限制。而且这种方法能够在线应用，适合任意非零的关节初始状态和目标状态，以便使机器人能够在运动过程中进行实时路径修正。最后提出的方法应用于一个七自由度的仿人机器人手臂来验证方法的有效性。
- 运动控制 /
- 操作臂规划 /
- 最小加速度控制 /
- 简化运动规划
Abstract: A novel approach based on a type of simplified motion planning (SMP) is presented in this paper to generate online trajectory for manipulator systems with multiple degrees of freedom (DOFs). The key issue is to find minimum-acceleration trajectory planning (MATP) to optimize the arm motion to reduce disturbance. Moreover, necessary and suffcient conditions for solution0s existence subject to all the kinematic constraints of joint position, velocity, acceleration and jerk are devised. Besides, this new method can be activated online from the arbitrary initial state to the arbitrary target state so that it enables the robot to change the original path at any time. Finally, the approach is applied to a real humanoid robot arm with seven DOFs to show its effciency.
- Motion control /
- manipulation planning /
- minimum-acceleration control /
- simplified motion planning (SMP)

HTML全文

参考文献(26)

[1]	Zefran M, Kumar V, Croke C B. On the generation of smooth three-dimensional rigid body motions. IEEE Transactions on Robotics and Automation, 1998, 14(4): 576-589
[2]	Yan Jing, Guan Xin-Ping, Luo Xiao-Yuan, Yang Xian. Consensus and trajectory planning with input constraints for multi-agent systems. Acta Automatica Sinica, 2012, 38(7): 1074-1082
[3]	Lin C, Chang P, Luh J. Formulation and optimization of cubic polynomial joint trajectories for industrial robots. IEEE Transactions on Automatic Control, 1983, 28(12): 1066-1074
[4]	Broquére X, Sidobre D, Herrera-Aguilar I. Soft motion trajectory planner for service manipulator robot. In: Proceedings of the 2008 IEEE International Conference on Intelligent Robots and Systems. Nice, France: IEEE, 2008. 2808-2813
[5]	Bianco C G L. Kinematically constrained smooth real-time velocity planning for robotics applications. In: Proceedings of the 2009 IEEE International Conference on Control and Automation. Christchurch, New Zealand: IEEE, 2009. 373-378
[6]	Haschke R, Weitnauer E, Ritter H. On-line planning of time-optimal, jerk-limited trajectories. In: Proceedings of the 2008 IEEE International Conference on Intelligent Robots and Systems. Nice, France: IEEE, 2008. 3248-3253
[7]	Rutkowski L, Przybyl A, Cpalka K. Novel online speed profile generation for industrial machine tool based on flexible neuro-fuzzy approximation. IEEE Transactions on Industrial Electronics, 2012, 59(2): 1238-1247
[8]	Piazzi A, Visioli A. Global minimum-jerk trajectory planning of robot manipulators. IEEE Transactions on Industrial Electronics, 2000, 47(1): 140-149
[9]	Xu P H Y, Liang B. Dynamic balance control of multi-arm free-floating space robots. International Journal of Advanced Robotic System, 1998, 2(2): 117-125
[10]	Xu Wen-Fu, Wang Xue-Qian, Xue Qiang, Liang Bin. Study on trajectory planning of dual-arm space robot keeping the base stabilized. Acta Automatica Sinica, 2013, 39(1): 69-80 (in Chinese)
[11]	Macfarlane S, Croft E A. Jerk-bounded manipulator trajectory planning: design for real-time applications. IEEE Transactions on Automatic Control, 2000, 19(1): 42-52
[12]	Kim K B, Kim B K. Minimum-time trajectory for three-wheeled omnidirectional mobile robots following a bounded-curvature path with a referenced heading profile. IEEE Transactions on Robotics, 2011, 27(4): 800-808
[13]	Behzadipour S, Khajepour A. Time-optimal trajectory planning in cable-based manipulators. IEEE Transactions on Robotics, 2006, 22(3): 559-563
[14]	Liu S. An on-line reference-trajectory generator for smooth motion of impulse-controlled industrial manipulators. In: Proceedings of the 2002 IEEE International Workshop on Advanced Motion Control Workshop. Maribor, Slovenia: IEEE, 2002. 365-370
[15]	Kroger T. Online trajectory generation: nonconstant motion constraints. In: Proceedings of the 2012 IEEE International Conference on Robotics and Automation. Minnesota, USA: IEEE, 2012. 2048-2054
[16]	Piazzi A, Visioli A. An interval algorithm for minimum-jerk trajectory planning of robot manipulators. In: Proceedings of the 36th IEEE International Conference on Decision and Control. San Diego, USA: IEEE, 1997. 1924-1927
[17]	Huang P F, Chen K, Yuan J P, Xu Y S. Motion trajectory planning of space manipulator for joint jerk minimization. In: Proceedings of the IEEE International Conference on Mechatronics and Automation. Harbin, China: IEEE, 2007. 3543-3548
[18]	Kyriakopoulos K J, Saridis G N. Minimum jerk path generation. In: Proceedings of the 1988 IEEE International Conference on Robotics and Automation. Philadelphia, PA: IEEE, 1988. 364-369
[19]	Elnagar A, Hussein A M. Acceleration-based optimal trajectory planning in 3d environments. In: Proceedings of the 1998 IEEE International Conference on Intelligent Robots and Systems. Victoria, B. C., Canada: IEEE, 1998. 1491-1496
[20]	Gasparetto A, Zanotto V. A new method for smooth trajectory planning of robot manipulators. Mechanism and Machine Theory, 2007, 42(4): 455-471
[21]	Amirabdollahian F, Loureiro R, Harwin W. Minimum jerk trajectory control for rehabilitation and haptic applications. In: Proceedings of the 2002 IEEE International Conference on Robotics and Automation. Washington, D C, USA: IEEE, 2002. 3380-3385
[22]	Gyorfi J S, Wu C H. A minimum-jerk speed-planning algorithm for coordinated planning and control of automated assembly manufacturing. IEEE Transactions on Automation Science and Engineering, 2006, 3(4): 454-462
[23]	Kalaycioglu S, Tandirci M, Nesculescu D S. Real-time collision avoidance of robot manipulators for unstructured environments. In: Proceedings of the 1993 IEEE International Conference on Robotics and Automation. Atlanta, USA: IEEE, 1993. 44-51
[24]	Yu Z G, Huang Q, Chen X C, Wei X. System design of an anthropomorphic arm robot for dynamic interaction task. In: Proceedings of the 2011 IEEE Control and Decision Conference. Mianyang, China: IEEE, 2011. 4204-4209
[25]	Huang Q, Yokoi K, Kajita S. Planning walking patterns for a biped robot. IEEE Transactions on Robotics and Automation, 2001, 17(3): 280-289
[26]	Vukobratovic M, Juricic D. Contribution to the synthesis of biped gait. IEEE Transactions on Biomedical Engineering, 1969, 16(1): 1-6