多相流过程参数检测技术综述

谭超; 董峰

doi:10.3724/SP.J.1004.2013.01923

多相流过程参数检测技术综述

doi: 10.3724/SP.J.1004.2013.01923

谭超,
董峰

1.
天津市过程检测与控制重点实验室天津大学电气与自动化工程学院天津 300072

基金项目:

国家自然科学基金(61227006,61104207,51176141),国家重大科学仪器设备开发专项(2011YQ120048)资助

详细信息

作者简介:
谭超天津大学电气与自动化工程学院讲师. 2003 年于天津大学自动化专业获得学士学位, 2006 年和2009 年于天津大学控制科学与工程专业获得硕士和博士学位. 过程检测与控制系统, 两相/多相流在线测试技术.E-mail: tanchao@tju.edu.cn

计量
- 文章访问数: 2643
- HTML全文浏览量: 130
- PDF下载量: 2140
- 被引次数: 0
出版历程
- 收稿日期: 2013-07-02
- 修回日期: 2013-08-28
- 刊出日期: 2013-11-20

Parameters Measurement for Multiphase Flow Process

TAN Chao,
DONG Feng

1.
Tianjin Key Laboratory of Process Measurement and Control, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072

Funds:

Supported by National Natural Science Foundation of China (61227006, 61104207, 51176141), National Key Scientific Instrument and Equipment Development Projects of China (2011YQ120048)

摘要

摘要: 多相流是现代流程工业及其相关科研领域内常见的控制与研究对象, 对其过程参数的检测是工业生产与科学研究中的一个研究热点问题. 本文针对工业过程中的多相流过程参数检测问题,介绍了多相流的特点及其过程参数, 并分类介绍了多相流过程参数检测方法,重点讨论了检测的难点及其未来发展趋势, 为更好地解决复杂工业过程多参数检测问题提供方法基础和借鉴.
- 工业过程参数 /
- 检测技术 /
- 多相流 /
- 流型识别 /
- 流量测量 /
- 含率估计
Abstract: Multiphase flow, as a typical research and control object, is a frequently encountered phenomenon in modern process industries and related scientific research fields. Measurement on its process parameters has been a widely investigated topic in engineering and academic researches. This paper aims at the measurement of process parameters of multiphase flow in process industries, introduces the characteristics and process parameters of multiphase flow, along with related measurement techniques in different categories. The difficulty and future trend of multiphase flow process parameter measurement are specially discussed to provide a fundamental measuring method to the measurement on multi-parameter of other complex industrial processes.
- Industrial process parameters /
- measuring techniques /
- multiphase flow /
- flow pattern identification /
- flow rate measurement /
- phase fraction estimation

HTML全文

参考文献(72)

[1]	Chen Xue-Jun. Advance in research on multiphase flow. Journal of Xi'an Jiaotong University, 1994, 28(5): 1-8 (陈学俊. 多相流热物理研究的进展. 西安交通大学学报, 1994, 28(5): 1-8)
[2]	Lin Zong-Hu, Wang Dong, Wang Shu-Zhong, Lin Yi. Recent trend towards engineering application of multiphase flow. Journal of Xi'an Jiaotong University, 2001, 35(9): 886-890 (林宗虎, 王栋, 王树众, 林益. 多相流的近期工程应用趋向. 西安交通大学学报, 2001, 35(9): 886-890)
[3]	Thorn R, Johansen G A, Hjertaker B T. Three-phase flow measurement in the petroleum industry. Measurement Science and Technology, 2013, 24(1): 012003
[4]	Teniou S, Meribout M. Multiphase flow meters principles and applications: a review. Canadian Journal on Scientific and Industrial Research, 2011, 2(8): 290-293
[5]	Xie C G, Atkinson I, Lenn C. Multiphase Flow Measurement in Oil and Gas Production. Bergen, Norway, 2006
[6]	Bertani C, De Salve M, Malandrone M, Monni G, Panella B. State of art and selection of techniques in multiphase flow measurement. Report Ricerca di Sistema Elettrico, Accordo di Programma Ministero dello Sviluppo Economico–ENEA, 2010
[7]	Ahmed W H, Ismail B I. Innovative techniques for two-phase flow measurements. Recent Patents on Electrical Engineering, 2008, 1(1): 1-13
[8]	Skea A F, Hall A R W. Effects of gas leaks in oil flow on single-phase flowmeters. Flow Measurement and Instrumentation, 1999, 10(3): 145-150
[9]	Skea A F, Hall A W R. Effects of water in oil and oil in water on single-phase flowmeters. Flow Measurement and Instrumentation, 1999, 10(3): 151-157
[10]	Wallis G B. One-Dimensional Two-Phase Flow. New York: McGraw-Hill, 1969. 408
[11]	Xing L C, Yeung H, Shen J, Cao Y. A new flow conditioner for mitigating severe slugging in pipeline/riser system. International Journal of Multiphase Flow, 2013, 51: 65-72
[12]	Juliá J E, Liu Y, Paranjape S, Ishii M. Upward vertical two-phase flow local flow regime identification using neural network techniques. Nuclear Engineering and Design, 2008, 238(1): 156-169
[13]	Xu X X. Study on oil-water two-phase flow in horizontal pipelines. Journal of Petroleum Science and Engineering, 2007, 59(1-2): 43-58
[14]	Bannwart A C, Rodriguez O M H, Trevisan F E, Vieira F F, de Carvalho C H M. Experimental investigation on liquid-liquid-gas flow: flow patterns and pressure-gradient. Journal of Petroleum Science and Engineering, 2009, 65(1-2): 1-13
[15]	Taitel Y, Barnea D, Brill J P. Stratified three phase flow in pipes. International Journal of Multiphase Flow, 1995, 21(1): 53-60
[16]	Wegmann A, Melke J, von Rohr P R. Three phase liquid-liquid-gas flows in 5.6mm and 7mm inner diameter pipes. International Journal of Multiphase Flow, 2007, 33(5): 484-497
[17]	Aćcikgöz M, Franćca F, Lahey R T Jr. An experimental study of three-phase flow regimes. International Journal of Multiphase Flow, 1992, 18(3): 327-336
[18]	Scarano F. Tomographic PIV: principles and practice. Measurement Science and Technology, 2013, 24(1): 012001
[19]	Li Y, Yang W Q, Xie C G, Huang S M, Wu A P, Tsamakis D. Gas/oil/water flow measurement by electrical capacitance tomography. Measurement Science and Technology, 2013, 24(7): 074001
[20]	Taitel Y, Dukler A E. A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow. AIChE Journal, 1976, 22(1): 47-55
[21]	Tan C, Dong F, Wu M M. Identification of gas/liquid two-phase flow regime through ERT-based measurement and feature extraction. Flow Measurement and Instrumentation, 2007, 18(5-6): 255-261
[22]	Ameel B, De Kerpel K, Caniére H, T’Joen C, Huisseune H, De Paepe M. Classification of two phase flows using linear discriminant analysis and expectation maximization clustering of video footage. International Journal of Multiphase Flow, 2012, 40: 106-112
[23]	Du M, Jin N D, Gao Z K, Sun B. Analysis of total energy and time-frequency entropy of gas-liquid two-phase flow pattern. Chemical Engineering Science, 2012, 82: 144-158
[24]	Wang L, Huang Z Y, Wang B L, Li H F, Li H Q. Flow pattern identification of gas-liquid two-phase flow based on capacitively coupled contactless conductivity detection. IEEE Transactions on Instrumentation and Measurement, 2012, 61(5): 1466-1475
[25]	Ghosh S, Pratihar D K, Maiti B, Das P K. Identification of flow regimes using conductivity probe signals and neural networks for counter-current gas-liquid two-phase flow. Chemical Engineering Science, 2012, 84: 417-436
[26]	Dukler A E, Hubbard M G. A model for gas-liquid slug flow in horizontal and near horizontal tubes. Industrial and Engineering Chemistry Fundamentals, 1975, 14(4): 337-347
[27]	Xu Y B, Wang H X, Cui Z Q, Dong F, Yan Y. Separation of gas-liquid two-phase flow through independent component analysis. IEEE Transactions on Instrumentation and Measurement, 2010, 59(5): 1294-1302
[28]	Plaskowski A, Beck M S, Thorn P R, Dyakowski T. Imaging Industrial Flows. Bristol and Philadelphia: IOP Publishing Ltd, 1995
[29]	Lin Zhong-Hu, Wang Dong, Wang Shu-Zhong, Lin Yi. Recent trend towards basic theory of multiphase flow. Journal of Xi'an Jiaotong University, 2001, 35(9): 881-885 (林宗虎, 王栋, 王树众, 林益. 近期多相流基础理论研究综述. 西安交通大学学报, 2001, 35(9): 881-885)
[30]	Lin Z H. Two-phase flow measurements with sharp-edged orifices. International Journal of Multiphase Flow, 1982, 8(6): 683-693
[31]	Xu L J, Zhou W L, Li X M. Wet gas flow modeling for a vertically mounted Venturi meter. Measurement Science and Technology, 2012, 23(4): 045301
[32]	Lupeau A, Platet B, Gajan P, Strzelecki A, Escande J, Couput J P. Influence of the presence of an upstream annular liquid film on the wet gas flow measured by a Venturi in a downward vertical configuration. Flow Measurement and Instrumentation, 2007, 18(1): 1-11
[33]	Zhang H J, Yue W T, Huang Z Y. Investigation of oil-air two-phase mass flow rate measurement using Venturi and void fraction sensor. Journal of Zhejiang University Science A, 2005, 6(6): 601-606
[34]	Steven R. Horizontally installed cone differential pressure meter wet gas flow performance. Flow Measurement and Instrumentation, 2009, 20(4-5): 152-167
[35]	Tan C, Wu H, Wei C, Dong F. Experimental and numerical design of a long-waist cone flow meter. Sensors and Actuators A: Physical, 2013, 199: 9-17
[36]	García-Berrocal A, Montalvo C, Blázquez J, Balbás M. Flow measurement of liquid hydrocarbons with positive displacement meters: the correction for slippage. Measurement Science and Technology, 2013, 24(5): 055306
[37]	Li D H, Feng F F, Wu Y X, Xu J Y. Investigation of the mixture flow rates of oil-water two-phase flow using the turbine flow meter. Journal of Physics: Conference Series, 2009, 147(1): 012062
[38]	Zheng G B, Jin N D, Jia X H, Lü P J, Liu X B. Gas-liquid two phase flow measurement method based on combination instrument of turbine flowmeter and conductance sensor. International Journal of Multiphase Flow, 2008, 34(11): 1031-1047
[39]	Venugopal A, Agrawal A, Prabhu S V. Review on vortex flowmeter-designer perspective. Sensors and Actuators A: Physical, 2011, 170(1-2): 8-23
[40]	Sun Z Q, Chen Y P, Gong H. Classification of gas-liquid flow patterns by the norm entropy of wavelet decomposed pressure fluctuations across a bluff body. Measurement Science and Technology, 2012, 23(12): 125301
[41]	Xu L J, Han J, Wang Y. Design of electrode array of inductance flowmeter. IEEE Sensors Journal, 2005, 5(5): 929-933
[42]	Leeungculsatien T, Lucas G P. Measurement of velocity profiles in multiphase flow using a multi-electrode electromagnetic flow meter. Flow Measurement and Instrumentation, 2013, 31: 86-95
[43]	Beck M S. Correlation in instruments: cross correlation flowmeters. Journal of Physics E: Scientific Instruments, 1981, 14(1): 7-19
[44]	Beck M S, Plaskowski A. Cross Correlation Flowmeters: Their Design and Application. Bristol England: IOP Publishing Ltd, 1987
[45]	Zhang W B, Wang C, Wang Y L. Parameter selection in cross-correlation-based Velocimetry using circular electrostatic sensors. IEEE Transactions on Instrumentation and Measurement, 2010, 59(5): 1268-1275
[46]	Xue Q, Wang H X, Yang C Y, Cui Z Q. Dynamical lag correlation exponent based method for gas-solid flow velocity measurement using twin-plane electrical capacitance tomography. Measurement Science and Technology, 2012, 23(8): 085301
[47]	Lysak P D, Jenkins D M, Capone D E, Brown W L. Analytical model of an ultrasonic cross-correlation flow meter, part 1: stochastic modeling of turbulence. Flow Measurement and Instrumentation, 2008, 19(1): 1-7
[48]	Lucas G P, Jin N D. A new kinematic wave model for interpreting cross correlation velocity measurements in vertically upward, bubbly oil-in-water flows. Measurement Science and Technology, 2001, 12(9): 1538-1545
[49]	Geng Y F, Yeung H, Cao Y, Xing L C, Zhu H, Drahm W. Using Coriolis mass flowmeter for wet gas metering. Measurement & Control, 2010, 43(6): 183-185
[50]	Henry M, Tombs M, Zamora M, Zhou F B. Coriolis mass flow metering for three-phase flow: a case study. Flow Measurement and Instrumentation, 2013, 30: 112-122
[51]	Li Z B, Wu Y X, Li D H. Gamma-ray attenuation technique for measuring void fraction in horizontal gas-liquid two-phase flow. Nuclear Science and Techniques, 2007, 18(2): 73-76
[52]	Arvoh B K, Hoffmann R, Halstensen M. Estimation of volume fractions and flow regime identification in multiphase flow based on gamma measurements and multivariate calibration. Flow Measurement and Instrumentation, 2012, 23(1): 56-65
[53]	Thorn R, Johansen G A, Hammer E A. Recent developments in three-phase flow measurement. Measurement Science & Technology, 1997, 8(7): 691-701
[54]	Śaetre C, Johansen G A, Tjugum S A. Tomographic multiphase flow measurement. Applied Radiation and Isotopes, 2012, 70(7): 1080-1084
[55]	Fischer F, Hampel U. Ultra fast electron beam X-ray computed tomography for two-phase flow measurement. Nuclear Engineering and Design, 2010, 240(9): 2254-2259
[56]	Anaraki P A. Conductivity effect on the capacitance measurement of a parallel-plate capacitive sensor system. Indonesian Journal of Physics, 2011, 22(4): 107-114
[57]	Ye J M, Peng L H, Wang W R, Zhou W X. Optimization of helical capacitance sensor for void fraction measurement of gas-liquid two-phase flow in a small diameter tube. IEEE Sensors Journal, 2011, 11(10): 2189-2196
[58]	Jia J B, Wang M, Schlaberg H I, Li H. A novel tomographic sensing system for high electrically conductive multiphase flow measurement. Flow Measurement and Instrumentation, 2010, 21(3): 184-190
[59]	Fu Y, Dong F, Tan C. Response of the excitation condition to electromagnetic tomography. Flow Measurement and Instrumentation, 2013, 31: 10-18
[60]	Nyfors E. Industrial microwave sensors——a review. Subsurface Sensing Technologies and Applications, 2000, 1(1): 23-43
[61]	Guo H M, Wu X, Jin Z, Zhao H M. Design and development of microwave holdup meter and application in production logging interpretation of multiphase flows. In: Proceedings of the 1993 SPE Annual Technical Conference and Exhibition. Houston, Texas: SPE, 1993. 355-364
[62]	Xie C G, Wu Z P. Microwave Doppler system for multiphase flow measurement. In: Proceedings of the 7th International Symposium on Measurement Techniques of Multiphase Flows. Tianjin, China: AIP, 2012. 319-326
[63]	Bolomey J C, Pichot C. Microwave tomography: from theory to practical imaging systems. International Journal of Imaging Systems and Technology, 1990, 2(2): 144-156
[64]	Goncalves J L, Paiva T A, Carvalho R D M, Venturini O J. Application of the Ultrasonic Technique for Monitoring and Measuring the Phase Fractions of Liquid-Gas-Solid Mixtures. In: Proceedings of the 2011 Brasil Offshore Conference and Exhibition. Macaé, Brazi: SPE, 2011
[65]	Zheng Y, Zhang Q K. Simultaneous measurement of gas and solid holdups in multiphase systems using ultrasonic technique. Chemical Engineering Science, 2004, 59(17): 3505-3514
[66]	Murai Y, Ohta S, Shigetomi A, Tasaka Y, Takeda Y. Development of an ultrasonic void fraction profiler. Measurement Science and Technology, 2009, 20(11): 114003
[67]	Murzyn F, Mouaze D, Chaplin J R. Optical fibre probe measurements of bubbly flow in hydraulic jumps. International Journal of Multiphase Flow, 2005, 31(1): 141-154
[68]	Appel M, Freeman J J, Pusiol D. Robust multi-phase flow measurement using magnetic resonance tTechnology. In: Proceedings of the 2011 SPE Middle East Oil and Gas Show and Conference. Manama, Bahrain: SPE, 2011. 932-951
[69]	Zhang J, Xu J Y, Wu Y X, Li D H, Li H. Experimental validation of the calculation of phase holdup for an oil-water two-phase vertical flow based on the measurement of pressure drops. Flow Measurement and Instrumentation, 2013, 31: 96-101
[70]	Pinguet B G, Roux G, Hopman N. Field experience in multiphase gas-well testing: the benefit of the combination of venturi and Gamma ray fraction meter. In: Proceedings of the 2006 SPE Annual Technical Conferences and Exhibition. San Antonio, USA: SPE, 2006
[71]	Tan Chao, Dong Feng. An overview on process tomography and its applications. Instrumentation Customer, 2010, 17(1): 3-6(谭超, 董峰. 过程层析成像与多相流测量应用. 仪器仪表用户, 2010, 17(1): 3-6)
[72]	Ismail I, Gamio J C. Review of multi-phase flow meters for oil industry. In: Proceedings of the 4th International Symposium on Measurement Techniques for Multiphase Flows. Hangzhou, China: International Academic Publishers/World Publishing Corporation, 2004. 596-601