基于改进Smith预估控制结构的二自由度PID控制

尹成强; 高洁; 孙群; 赵颖; 尹成强; 高洁; 孙群; 赵颖

doi:10.16383/j.aas.2018.c170596

[1]

Liu T, Gao F R. Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics. ISA Transactions, 2011, 50(2): 239-248 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=8e1fec3de2fdfed6d47fd8bb1bfdf491

[2]

Vanavil B, Chaitanya K K, Rao A S. Improved PID controller design for unstable time delay processes based on direct synthesis method and maximum sensitivity. International Journal of Systems Science, 2015, 46(8): 1349-1366 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.1080/00207721.2013.822124

[3]

Seer Q H, Nandong J. Stabilization and PID tuning algorithms for second-order unstable processes with time-delays. ISA Transactions, 2017, 67: 233-245 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=3f176a0d140e7a7608a85c23a181ba10

[4]

Zhang G Q, Zhang X K, Zhang W D. Robust controller synthesis for high order unstable processes with time delay using mirror mapping technique. ISA Transactions, 2015, 59: 10-19 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=1ac171a7294c271e0940654622fe040b

[5]

Zhang G Q, Zhang X K, Guan W. Stability analysis and design of integrating unstable delay processes using the mirror-mapping technique. Journal of Process Control, 2014, 24(7): 1038-1045 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=32f9ba608ac7f42bb9c2e9bc7d4a9edc

[6]

肖强, 谢巍.针对时滞系统的一般化内模控制方法.自动化学报, 2011, 37(4): 464-470 doi: 10.3724/SP.J.1004.2011.00464

Xiao Qiang, Xie Wei. A GIMC architecture for timed- delay systems. Acta Automatica Sinica, 2011, 37(4): 464-470 doi: 10.3724/SP.J.1004.2011.00464

[7]

Wang Q G, Hang C C, Yang X P. Single-loop controller design via IMC principles. Automatica, 2001, 37(12): 2041- 2048 http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ029982756/

[8]

Skogestad S. Simple analytic rules for model reduction and PID controller tuning. Journal of Process Control, 2003, 13(4): 291-309 http://d.old.wanfangdata.com.cn/OAPaper/oai_doaj-articles_5e047a5c6dc4e7cd03e154e9ab666e46

[9]

Vanavil B, Anusha A V N L, Perumalsamy M, Seshagiri Rao A S. Enhanced IMC-PID controller design with lead lag filter for unstable and integrating processes with time delay. Chemical Engineering Communications, 2014, 201(11): 1468-1496 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.1080/00986445.2013.818983

[10]

Begum K G, Rao A S, Radhakrishnan T K. Maximum sensitivity based analytical tuning rules for PID controllers for unstable dead time processes. Chemical Engineering Research and Design, 2016, 109: 593-606 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=d63e6a66a07fd73c35c40ed92ef1986f

[11]

汤赵建, 蒋北艳, 靳其兵.基于稳定裕度的新型IMC-PID整定方法.北京化工大学学报(自然科学版), 2017, 44(5): 105-110 http://d.old.wanfangdata.com.cn/Periodical/bjhgdxxb201705017

Tang Zhao-Jian, Jiang Bei-Yan, Jin Qi-Bing. A novel IMP-PID tuning method based on stability margin. Journal of Beijing University of Chemical Technology (Natural Science), 2017, 44(5): 105-110 http://d.old.wanfangdata.com.cn/Periodical/bjhgdxxb201705017

[12]

Das S, Pan I. On the mixed H₂/H_∞ loop-shaping tradeoffs in fractional-order control of the AVR system. IEEE Transactions on Industrial Informatics, 2014, 10(4): 1982-1991 http://ieeexplore.ieee.org/xpls/icp.jsp?arnumber=6813659

[13]

Zeng G Q, Chen J, Dai Y X, Li L M, Zheng C W, Chen M R. Design of fractional order PID controller for automatic regulator voltage system based on multi-objective extremal optimization. Neurocomputing, 2015, 160: 173-184 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c2e4cf641143068fb90d95742a859d40

[14]

Zeng G Q, Chen J, Chen M R, Dai Y X, Li L M, Lu K D, et al. Design of multivariable PID controllers using real-coded population-based extremal optimization. Neurocomputing, 2015, 151(p3): 1343-1353 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=b6ee227533eb1898f319add1076ab4df

[15]

Srivastava S, Pandit V S. A 2-Dof LQR based PID controller for integrating processes considering robustness/perf- ormance tradeoff. ISA Transactions, 2017, 71: 426-439 http://www.ncbi.nlm.nih.gov/pubmed/28941953

[16]

黄德先, 江永亨, 金以慧.炼油工业过程控制的研究现状、问题与展望.自动化学报, 2017, 43(6): 902-916 doi: 10.16383/j.aas.2017.c170157

Huang De-Xian, Jiang Yong-Heng, Jin Yi-Hui. Present research situation, major bottlenecks, and prospect of refinery industry process control. Acta Automatica Sinica, 2017, 43(6): 902-916 doi: 10.16383/j.aas.2017.c170157

[17]

许锋, 魏小丽, 任丽红, 罗雄麟.基于多变量广义预测控制的不稳定系统控制结构选择方法.自动化学报, 2013, 39(9): 1547-1551 doi: 10.3724/SP.J.1004.2013.01547

Xu Feng, Wei Xiao-Li, Ren Li-Hong, Luo Xiong-Lin. A control structure selection method based on multivariable generalized predictive control for unstable processes. Acta Automatica Sinica, 2013, 39(9): 1547-1551 doi: 10.3724/SP.J.1004.2013.01547

[18]

Zhang W D, Gu D Y, Wang W, Xu X M. Quantitative performance design of a modified Smith predictor for unstable processes with time delay. Industrial and Engineering Chemistry Research, 2004, 43(1): 56-62 doi: 10.1021/ie020732v

[19]

Rao A S, Chidambaram M. Analytical design of modified Smith predictor in a two-degrees-of-freedom control scheme for second order unstable processes with time delay. ISA Transactions, 2008, 47(4): 407-419 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=6435258c4dd7966c63beeec35e8db89d

[20]

Mataušek M R, Ribic A I. Control of stable, integrating and unstable processes by the modified Smith predictor. Journal of Process Control, 2012, 22(1): 338-343 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=b870f9103807aad1e7bf1b806c1d4427

[21]

Tan W, Marquez H J, Chen T W. IMC design for unstable processes with time delays. Journal of Process Control, 2003, 13(3): 203-213 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=66f4025470065e24910842db889a173f

[22]

刘涛, 张卫东, 顾诞英.化工不稳定时滞过程鲁棒控制的解析设计.控制与决策, 2005, 20(5): 575-578 http://d.old.wanfangdata.com.cn/Periodical/kzyjc200505021

Liu Tao, Zhang Wei-Dong, Gu Dan-Ying. Analytical design of robust control for unstable chemical and industrial processes with time delay. Control and Decision, 2005, 20(5): 575-578 http://d.old.wanfangdata.com.cn/Periodical/kzyjc200505021

[23]

李敏, 王琪, 靳其兵.不稳定时滞对象的最优鲁棒二自由度控制器解析设计.信息与控制, 2016, 45(3): 313-319 http://d.old.wanfangdata.com.cn/Periodical/xxykz201603009

Li Min, Wang Qi, Jin Qi-Bing. Analytical design of optimal robust two-degree-of-freedom controller for unstable processes with time delays. Information and Control, 2016, 45(3): 313-319 http://d.old.wanfangdata.com.cn/Periodical/xxykz201603009

[24]

张井岗, 秦娜娜.串级不稳定时滞过程的内模控制器设计.电子科技大学学报, 2017, 46(1): 38-45 http://d.old.wanfangdata.com.cn/Periodical/dzkjdxxb201701007

Zhang Jing-Gang, Qin Na-Na. Design method of IMC controllers for unstable cascade processes with time delay. Journal of University of Electronic Science and Technology of China, 2017, 46(1): 38-45 http://d.old.wanfangdata.com.cn/Periodical/dzkjdxxb201701007

[25]

Ajmerin M, Ali A. Two degree of freedom control scheme for unstable processes with small time delay. ISA Transactions, 2015, 56: 308-326 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=9931740737a8f15b4459b0b2ae4575dc

[26]

Padhy P K, Majhi S. Relay based PI-PD design for stable and unstable FOPDT processes. Computers and Chemical Engineering, 2006, 30(5): 790-796 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bda09cc6bb838ac1f3f64fb41ed23eb2

[27]

Vijayan V, Panda R C. Design of PID controllers in double feedback loops for SISO systems with set-point filters. ISA Transactions, 2012, 51(4): 514-521 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=444f11695ce4d7cd29885d7f30eb8784

[28]

Wang Q, Lu C H, Pan W. IMC PID controller tuning for stable and unstable processes with time delay. Chemical Engineering Research and Design, 2016, 105: 120-129 http://d.old.wanfangdata.com.cn/Periodical/zngydxxb-e202001009

[29]

Shamsuzzoha M, Lee M Y. Analytical design of enhanced PID filter controller for integrating and first order unstable processes with time delay. Chemical Engineering Science, 2008, 63 (10): 2717-273 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=222edd6e81fe5983e2d98f50d5d7756c

[30]

Wang Q G, Lee T H, He J B. Internal stability of interconnected systems. IEEE Transactions on Automatic Control, 1999, 44(3): 593-596 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=e990bea0df126be8bf195b52d94ed9a5

[31]

Morari M, Zafiriou E. Robust Process Control. Englewood Cliffs: Prentice Hall, 1989.

[32]

Kumar D B, Padma S R. Tuning of IMC based PID controllers for integrating systems with time delay. ISA Transactions, 2016, 63: 242-255 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=a77656da8528daf16c67ce90d58bc992

[33]

Ghousiya B K, Rao A S, Radhakrishnan T K. Enhanced IMC based PID controller design for non-minimum phase (NMP) integrating processes with time delays. ISA Transactions, 2017, 68: 223-234 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=a0b2f8c7401d9fdd9546386d956a774b

[34]

Vanavil B, Rao A S. Improved performance with PID filter controllers for unstable processes involving time delays. In: Proceedings of the 2011 International Conference on Process Automation, Control, and Computing. New York, USA: IEEE, 2011. 1-6